Clamp for support wheel diameter 48mm with center distance between holes of 105mm.
Technical information
Manufacturer: Winterhoff
Item number: ST 48 H 200VB
Included
Clamp
Mounting material: 2x bolt, 2x lock nut, body washers
Heavy duty tripod (support leg) 48mm - very robust design
Technical information
Manufacturer article number: RSR 48-700
Height: 70cm
Tube diameter: 48mm
Equipped with a welded protrusion so that the support leg cannot fall down in the raised position - see detail image
Not included
The clamp to attach the support leg to the trailer is not included - this can be selected via the options (1 clamp 48mm required per support leg).
Original tension shackles brand Steelpress SPP type ZB-01A. This lever closure is ideal for use on trailer tailboards or haulm racks. Typically used on brands such as Saris, Humbaur etc.
Characteristics
40x210mm
Traction force: 600 daN (600kg)
Dekra approved
An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction.
This blank aluminum type plate stating Flemish/Dutch properties covers the following information:
Type
ID number ** (=chassis number)
Construction year
Total weight [KG] ** (=gross/MTM)
Permissible loading capacity [KG] (=tare)
Permissible rear axle load [KG]
📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check.
💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.
Original torsion axle (old model) for the platform trailer model from VDM Trailers and Weytens.
Attention!
⚠️For platform trailers built in 2012-2020, the pad height (D) was 50mm, for newer models it is 100mm
This item is only available on order - delivery time depends on the manufacturer's stock - contact us
Technical information
Brand
Euroflex-Weytens
Braking system
Not inhibited
Type
950W-BBWO
Pad size (A)
920mm
Flange size (B)
1350mm
Sleeve size (C)
1070mm
Path height (D)
50mm
Path direction (E)
IN
Weight - excluding wheels and bolts
21 kg
Weight - including wheels and bolts
45kg
Load capacity
1050 kg
Wheel bolts - type
M12 x 1.5
Wheel bolts - quantity per axle
8
Wheels - tire
155/80 R13
Not included
Wheels
Wheel bolts
Edit
Bolts and nuts for attachment to the chassis
New loose glass for rear light Multipoint IV from the manufacturer Aspöck, suitable for different types of trailers and tow trucks. The Multipoint IV model can be used for the function of rear lights, traffic lights, rear turn signals, fog lights and reflector triangle.
Characteristics
Loose glass suitable for model : Multipoint IV - LEFT
Manufacturer part number: UT000252
Light source: not included
Functions: traffic light, tail light, turn signal, license plate light, reflector, fog light
An identification plate is legally required on all trailers on public roads, both braked and unbraked, regardless of age or year of construction.
This blank aluminum type plate stating Flemish/Dutch properties covers the following information:
Type
ID number ** (=chassis number)
Construction year
Total weight [KG] ** (=gross/MTM)
Permissible loading capacity [KG] (=tare)
Permissible rear axle load [KG]
📌** Chassis number and gross vehicle weight (MAM) are also mandatory on all unbraked trailers and must be immediately readable during a police check.
💡Top Tip - For the chassis number - if not existing - you can assign a unique number such as your national register number.
Insert cap or impact cap for finishing steel pipes or other square holes. The indicated size in millimeters is the length x width of the cap.
Available per piece, aesthetic finish, good clamping.
With this impact cap you prevent snags on your skin or clothing due to sharp edges of metal profiles. Can also be used on the box profiles of trailers if a tarpaulin is stretched.
Adapter plug to switch from a vehicle power strip with 7 pins to a trailer with a 13 pin plug
Characteristics
Adapter short type
Suitable for car: 7 pin
Suitable for trailer: 13 pin
Jaeger
High quality ABS plastic
Original wheel from VDM Trailers 13 inches, can also be used as a spare wheel.
High load capacity 500KG
Characteristics
Size
13 inches
Tire brand
Kargomax, Kargotrail or equivalent
Band size
155/80R13
Hub diameter
59mm
Lurch
4x100mm
Offset
ET30
Carrying capacity
500 KG
Original VDM Trailers rear panel with wooden plate, for rigid truck types with a width of 130cm.
Dimensions/model are identical to older years of construction, but the upper part is finished with a closed profile with punched round holes.
Characteristics
Width: 125 cm
Height: 40 cm
Suitable for VDM Trailers type box truck with tension locks
Hot dip galvanized steel
Concrete plywood plating 12mm
Remark
Suitable for construction year from 2023
Without triangular reflectors red (reflectors in rear light units)
Trailer tester suitable for 7 and 13 pin sockets and trailer lighting plugs that operate on 12 volts. Easily diagnose a defective wire or broken circuit of the lighting at both the car socket and the trailer plug.
Characteristics
Male and female side
Suitable for 12V lighting circuits
Suitable for all 7-pin car sockets as standard
Suitable for 7 pin trailer lighting plug as standard
With an adapter it can also be used on a 13-pin car socket and trailer lighting plug
Operates on a 9 volt battery
Not included
Excluding 9 volt battery
Keywords
Socket tester, 7-pin tester, lighting tester
